제품소개

해외 우수한 분석, 측정, 계측기기 제조회사의 독점 대리점 !

home
제품소개home

Pyrometer

Diadem DS09 / DI13 / DI16 PyrometerDS09 / DI13 / DI16

제품이미지

Digital transfer standard pyrometer for high-precision inspection of calibration sources

DS09 / DI13 / DI16

  • 자동 온도 조절 장치로 제어되는 detector
  • 1 ms의 빠른 측정시간과 높은 정확도
  • 온도 범위 250 - 3500°C
  • 레이져 / 렌즈로 정확한 Alignment
  • RS-485
제품문의 자료실 동영상 카달로그
BEST Good
온도범위
온도범위
Model DS09 DI13 DI16
Spectral range 0.7 - 1.1 μm 1.27 μm 1.45 - 1.8 μm

Temperature ranges

 600 - 1500 °C 1000 - 3500 °C 250 - 1400 °C
700 - 1800 °C - 300 - 1500 °C
제품사양
제품사양
Pyrometer Specification
Detector

DS09: Silicon / DI13, DI16: InGaAs
Uncertainty
(ε = 1, t90 = 1s, TAmb = 20-26°C)

Up to 1500°C: 0.15% of measured value in °C +1 K

Up to 2500°C: 0.2% of measured value in °C

Up to 3000°C: 0.3% of measured value in °C

Up to 3500°C: 0.4% of measured value in °C
Repeatability
(ε = 1, t90 = 1s, TAmb = 20-26°C)		 0.06% of measured value
Response time t90

1 ms (with dynamical adaptation at low signal levels),

adjustable up to 10 s
Emissivity ε 0.050 to 1.000 (corresponds 5-100% in 0.1% steps)
Analog output

0 - 10 V DC, load > 100 kΩ

Resolution: 16 Bit, corresponds < 0.007% of temperature range
Serial interface

RS485, half duplex 4.8 to 115.2 kBaud,

resolution via interface: 0.01°C or 0.01°F
Temperature coefficient 32 ppm/°C ambient temperature change in a range of 10 to 40°C
Ambient temperature Operation: 0 to 50°C, Storage: -20 to 70°C
Relative humidity No condensing conditions
Power requirement 24 V DC (18 - 30V DC), maximal 20 VA
Isolation Circuit 1 and circuit 2 galvanically isolated from each other
Housing / protection class Aluminum, IP65 to DIN 40 050 with connector
CE Label According to EU directives for electromagnetic immunity
Laser targeting light (optional) red, 650 nm, P < 1 mW, class II to IEC 60825-1
초점거리
초점거리
Device versions / Optics
Optics Measuring distance
a [mm]		 Spot size diameter M [mm]
DS09 DI13 DI16
OD09-A0 600 mm 1.1 mm 1.4 mm 1.6 mm
OD09-B0 800 mm 1.5 mm 1.9 mm 2.2 mm
OD09-C0 1200 mm 2.4 mm 3.1 mm 3.4 mm